AA-D-600 Door, Vault, SecurityThis specification covers security vault doors which are designed to conform to the minimum standards for physical security equipment as required by the Information Security Oversight Office Directive governing the safeguarding of national security information. The doors provide protection against unauthorized entry for the periods of time specified in 1.2.1.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16

AA-D-600D

3.13.4 Number label. All vault doors shall have a number label securely affixed to the front face. Regardless of the method used, the label attachment shall not degrade the door security. The label shall be mounted on the door frame, above or to the left side of the door. The label shall be nominal 0.5 mm thick, satin finished aluminum and shall be 63-65 mm by 17-20 mm. The label numbering system shall be established by the manufacturer to provide non-repetitive numbers. The label numbers shall be not less than 4.5 mm high and shall be embossed.

3.14 Workmanship. The workmanship shall be of a quality to produce a serviceable and well finished end item, able to withstand hard daily usage. The edges of all exposed parts and sheets shall be protected by folding, beading, flanging or grinding to eliminate burrs, roughness, and sharp edges. The bending of channels and flanges shall be straight and smooth. Welding and brazing shall produce secure and rigid connections. Lock washers, cotters pins, clips, and other retainers or built-in features shall be used to prevent loosening of screws, bolts, and nuts which may cause

disengagement of parts and possible lock-out. Moving parts shall operate smoothly without binding or jamming. The door shall be free of any defects or features which may adversely affect its appearance and serviceability or which may cause personal injury.

Table I - Classification of Preparation for Delivery Defects

Examine	Defect
Markings	Omitted; incorrect; illegible; improper size, location, sequence or method of application.
Materials	Any component missing or damaged.
Workmanship	Incomplete closure of box, loose strapping, distortion of container.

3.15 Replacement of parts. Parts subject to replacement, such as the combination lock and face hardware, shall be capable of identical replacement in the field without the use of special tools or specially qualified personnel and shall be possible without affecting the security integrity of the door.

3.16 Spare parts list. A spare parts list of all door parts which may be subject to subsequent replacement shall be furnished with each door delivered under contract. The parts list shall clearly identify the parts by descriptions and part numbers. The list shall be printed on paper or other suitable material and bonded by glue or adhesive to the inside face of the door frame.