AA-C-2859A
3.2.3.3 Cadmium plating. Cadmium plating shall be in accordance with Class I, Type I, of
SAE-AMS-QQ-P-416.
3.2.3.4 Zinc coating. Zinc coating shall be in accordance with ASTM B 633, type I, class 2.
3.2.4 Color of finish. The color of the finish shall be Gray Color - No. 26134 from FED- STD-595.
3.3 Construction and design.
3.3.1 Design. The design and general appearance of the cabinet shall be consistent with the intended use. Cabinets shall be vertical (upright) with a single, hinged door opening out- ward.
3.3.2 Assembly. The top, sides, back, bottom, and case frame members shall be assem- bled into a rigid unit. All welding, brazing, and mechanical attachments shall accomplish secure and rigid joints in proper alignment. Welding and brazing shall be sound without porosity. All protruding and depressed welds on the cabinet exterior shall be filled and sanded or ground smooth.
3.3.3 Dimensions. Cabinets shall be of the dimensions specified in table I.
TABLE I. Cabinet dimensions
Outside: + 3.2 mm (not including channel base or face hardware) |
Inside: Minimum clear opening |
||||
Height |
Width |
Depth |
Height |
Width |
Depth |
1310 mm (51-1/2 ") |
560mm (22") |
990mm (39") |
1232mm (48- 1/2") |
489mm (19- 1/4") |
865mm (34") |
3.3.4 Weight. The total net weight of the cabinet shall not exceed 750 kilograms (1650 lbs). The weight shall be clearly and permanently marked on the cabinet base in characters not less than 12 mm in height. The net weight of the cabinet shall not exceed 1223 kilograms per square meter ( 250 pounds per square foot) of cabinet base area. The cabinet's base and top area shall be of the same dimensions. The weight shall be clearly and permanently marked on the cabinet in characters not less than 12 mm in height so as to be visible from the front. The weight per square inch of base interaction with the floor shall also be marked.
3.3.5 Door. The cabinet shall have a hinged door which shall swing outward to the open position. The door shall be in perfect alignment with the door frame and shall move easily and smoothly on the hinges. The door in any normal open position shall not overbalance the empty cabinet. The cabinet door shall be tested as specified in 4.4.8.1.
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business