AA-C-2859A
3. REQUIREMENTS
3.1 Qualification. The security cabinets furnished under this specification shall be products which have been tested, and have passed the qualification tests specified in section 4, and
have been listed on or approved for listing on the applicable qualified products list (QPL).
3.1.1 Qualification suspension.
3.1.1.1 Development of entry techniques. The cabinets qualified under this specification will be continually tested by the Government during the term of qualification to determine whether the security protection afforded by the cabinets should or can be improved. If, at any time, entry techniques are developed within the framework of the specification which affect a cabinet's security integrity, it shall be removed from the QPL. The manufacturer will be required to modify the product to the extent necessary to prevent entry and have the cabinet requalified.
3.1.1.2 Change in specification requirements. This specification will be continually reviewed by the Government to determine whether specification requirements should or can be changed to improve product quality. If, at any time, requirements are changed, and such changes affect the qualification status of a qualified cabinet, it shall be removed from the QPL. The manufacturer will be required to modify the product to the extent necessary to comply with specification changes and have the cabinet requalified.
3.2 Material. Material used in the cabinet's construction shall be as specified herein. Material not definitely specified shall be of good commercial quality, suitable in all respects for the purpose intended.
3.2.1 Steel. Steel used in the cabinet shall be of a type, thickness, and strength to meet all applicable requirements of this specification. Steel shall be free from rust, scale, pits, buckles, and other imperfections which might adversely affect the appearance or the serviceability of the finished product.
3.2.2 Face hardware. Material used in the cabinet door handle and lock bolt operating handle shall be satin-finished anodized aluminum, type 430 corrosion resistant steel, brushed chromium on steel, or on die-cast zinc, brass or bronze, or electrolysis nickel coating. Chromium plating shall be as specified in 3.2.3.2.
3.2.3 Finishing materials.
3.2.3.1 Enamel and lacquer. The final coat for the cabinet shall be either an enamel of the baking type, or it may be an air-dry, textured finish, nitrocellulose lacquer or water reducible coating. The quality of the final coat and its application shall be in accordance with good com- mercial standards and practices. The color shall be as specified in 3.2.4.
3.2.3.2 Chromium plating. Chromium plating shall be Class I, Type II, of SAE-AMS- QQ-C-320.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business