A-A-2122F
4.2 First article requirements. The first article inspection shall be in accordance with the solicitation.
4.3 Quality conformance inspection. A sample of the finished product shall be selected in accordance with paragraph 4.6 of this CID for quality conformance verification. The sample shall be examined to verify that the
requirements referenced in sections 1, 2, and 3 have been met. Any non-conformance with the above requirements shall be considered a defect. All defects found shall be classified as major/minor in accordance with paragraphs 4.4 and 4.5 of this CID.
4.4 Major defects. The following conditions of non- conformance with the stated requirements of the CID shall be considered as major defects which may potentially affect the safety, functionality, durability, usability, and life of the purchased items.
Major Defects
Reference Defects
Dimensions: - Height not as specified.
- Top width or depth not as specified.
- Drop leaves width or depth
- Thickness not as specified.
- Leg square tubing dimension not as specified.
- Panel dimension not as specified.
- Castor dimension not as specified.
Material and - Top, leaves, legs, panels, hinges, and leaf
parts: supports not as specified.
- Castors (two minimum) are not provided with
brakes.
- Castor tread hardness not as specified.
Construction: - The top overhang exceeds 12.7 mm.
- The panels are not positioned as specified.
- The drop leaves are not attached as specified.
- The drop leaves are not supported as
specified.
- Castors are not firmly attached to legs.
- Panel construction is weak, allows for thin or
sharp edges.
Workmanship: - Leaves, when raised, are not level with the
top not horizontal, or separated from the top by
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business