A-A-2122F
3.3 Performance. The stand shall be capable of meeting all of the requirements when tested in accordance with paragraphs
4.7 through 4.10
3.4 Identification label. The label shall have the contractor's name or trademark, NSN (if specified), month and year of manufacture legibly marked with permanent dark ink. The label shall be affixed to the underside of the top. It shall not be removable by hand without defacement after being affixed for 4 hours.
3.5 Workmanship. The following attributes shall be evidence of acceptable workmanship:
When the drop leaves are in the raised position, the leaves are firm and at the same level as the top; the gap between the edge of the leaf and the adjacent edge of the top does not exceed 1.16 mm. When the leaves are in the dropped position, the leaves are resting tightly against the legs. The outside surface of the panels is flush with the adjacent surface of
the legs. All of the fastening materials are concealed from external view. All of the edges and corners are eased and smooth. All metal surfaces are free from sharp edges and burrs. The baked enamel finish is smooth, without runs, grit,
wrinkles, or separation of color. The chromium plating is free of pits, stains and brush or grind marks. In general, there
are no defects that may affect the serviceability, stability, rigidity, maneuverability, or appearance of the stand. Any findings contrary to any of the above shall be considered evidence of unacceptable workmanship.
4 Quality assurance provisions.
4.1 Responsibility for inspection. The contractor shall be responsible for the performance of all inspection and testing in fulfillment of all requirements specified herein. Unless otherwise specified in the contract or purchase order, the contractor may use his own or any other facilities approved by the Government as suitable for the performance of inspections and tests required by this CID. The Government reserves the right to perform any or all of the inspections and/or tests
set forth in this CID, as deemed necessary to provide assurance of supply conformance to prescribed requirements.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business