A-A-2122F
backing sheet on the bottom. Laminate shall be walnut grain per GSA Standard No. FSS-L-01002 or white leather per GSA Standard No. FSS-L-01001, as specified by the contracting officer. Alternatively, the manufacturer may provide his equivalent commercial walnut grain and white leather HP laminated plastic subject to the contracting officer's approval. The top overhang shall be 12.7 mm maximum. Overall thickness of the top and drop leaves shall be 25.4 mm.
3.1.1.2 Hinges and leaf supports. The drop leaves shall be securely attached to the frame or the underside of the top using piano hinges. The hinges shall be made of steel with a finish matching that of the legs. The leaf support shall also be made of steel providing strength and rigidity to the leaves when in the raised position. The supports shall be easily operated.
3.1.2 Legs. The legs shall be a minimum of 22.2 mm square, stainless or chromium plated steel with a polished finish. The legs shall have casters a minimum of 63.5 mm in diameter, with ball bearing swivels. The wheel tread shall have a Shore durometer D scale hardness of 35 to 50 at 21.1 degrees C. A minimum of two casters shall have brakes. The stands maybe shipped without the legs attached, provided the supporting panel structure and legs are specifically designed for this KD feature. The legs shall be capable of being assembled by laymen (office workers) within 10 minutes using simple hand tools. Simple, illustrated assembly instructions shall be provided. The warranty provisions shall apply to the layman assembled stands.
3.1.3 Panels. The stands shall have three separate panels, two ends and one back extending from the underside of the top (6.3 mm gap, maximum) to a minimum of 247.6 mm down the legs. The front support, if required, shall not extend below the underside of the top in excess of 44.5 mm. All exposed edges shall be formed for strength and to avoid sharp or thin edges.
3.2 Finish. The finish shall be semi-gloss baked enamel. The colors shall match Fed. Std. No. 595 black (27040), gray (26134) and parchment (within the range delimited by 26586 and
26405). Alternatively, the manufacturer may provide his commercial black, gray, and parchment baked enamel finish subject to the contracting officer's approval.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business