A-A-2095D
shall match Federal Standard No. 595, black (27040) and parchment within the range delimited by (26586) and (26405). Alternatively, the manufacturer may provide his commercial black or parchment baked enamel finish, subject to contracting officer approval.
Identification label. The label shall have the contractor’s name or trademark, contact number, National Stock Number (if specified), and month, and year of manufacture legibly marked in dark ink. The label shall be located on the inside of the knee space near the top and black of the pedestal or panel end. The label shall not be removable by hand without defacement after being affixed for four hours.
Workmanship. The workmanship shall be of the quality to produce finished desks acceptable in appearance, function and serviceability and prevent potential hazard to personnel or their clothing. The joining of all the components of the commodities covered by this CID shall result in compact units of sufficient strength to prevent distortion, breakage or loosening of any component during handling, shipping, daily usage and when moved within the office.
Quality assurance provisions. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements specified herein. Sampling for inspection shall be performed in accordance with MIL-STD-105, unless an equal or better plan is approved by the contracting officer or his/her representative. A lot shall consist of units of one type, style, size, and color. The sample shall be one each. Inspection levels and AQL’s shall be as follows.
For fit, finish and all other workmanship – Level II, AQL 6.5 defects per hundred units.
For packaging, packing, and marking – Level S-2, AQL 4.0 percent defective.
Any failure to meet the dimensions, color, identification label or performance requirements shall cause rejection of the lot.
Performance.
ANSI/BIFMA. Each desk shall comply with the requirements of BIFMA Desk Products Standard X5.5 – 1989, with the following exceptions.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business