A-A-2095D
overhangs at the back and on two sides.
One storage drawer and one file drawer in right pedestal, three storage drawers in left pedestal.
Type III – Table desk, no pedestals with center drawer and lock. Recessed knee space at rear
Style C – Non-conference style, no overhang
Size 3 – 1800 mm W x 900 mm D x 750 mm H
NOTES – 1. Height shall be measured with glides fully retracted into legs.
2. Unless otherwise specified, dimensions shall have a tolerance of + 25 mm.
3. For style C and E desks the plus tolerance on the width dimension shall be 58 mm.
General construction.
Laminated top. The desk shall have a particleboard top with a self-edged, high pressure laminated plastic face and a backing sheet to produce a balanced sandwich construction. Alternatively, the top may be steel with a self-edged, high pressure laminated plastic face. The simulated walnut grain of the laminated plastic tops shall match GSA Standard Sample No FSS-L-01002. Alternatively, the manufacturer may provide his equivalent, commercial, walnut grain laminated plastic, subject to contracting officer approval. Overall thickness of the top shall be 25 mm, minimum.
Legs. Four, 25 mm square (minimum), full height legs shall be reinforced as necessary to withstand all applicable tests. All exterior surfaces of legs shall be polished finish, stainless steel or polished, chrome plated steel. The legs shall be equipped with adjustable leveling glides.
Pedestal. The overall size of the drawer pedestal shall be of such dimensions as to properly contain the kind, size and location of the drawers specified. The pedestal walls shall be not less than 0.70 mm steel with corners constructed to eliminate rough metal edges. There shall be an end filler panel placed between the desk legs to create a flush profile. All storage drawer fronts and file drawer fronts shall extend from the leg to the kneespace side of the pedestal, with the kneespace side of the drawer front overlapping the side of the pedestal and positioned in the same plane as the kneespace side of the pedestal. (Necessary clearance shall be allowed between legs and drawer fronts.)
Drawers. The drawers shall have stops to prevent accidental
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business