A-A-2086D
performing the top loading test specified in BIFMA.
Chromium plating test. Plated samples shall be tested for corrosion in accordance with the !ipercent neutral salt spray at 35°C in accordance with ASTM Test Method B-117. The test period shall be not less than 48 hours. After the specified exposure is completed, the specimen shall be visually examined to assure that the plating shows no evidence of peel, chip, uneven color, powder film, pits, or stain. Widely scattered spots of corrosion are permitted, however, none of these spots shall exceed 1.6 mm along the greatest dimension.
Regulatory requirements. The offeror/contractor is encouraged to use recovered materials in accordance with Public Law 94-580 to the maximum extent practicable.
Preservation, packaging, packing, labeling, and marking. The preservation, packaging, packing, labeling, and marking shall be as specified in the contract or order.
Standards. The issues of ANSI/BIFMA X5.5, M1L-STD-105, and Fed. Std. 595 in effect on the date of the solicitation shall be used a to determine compliance with the stated requirements.
Notes.
Ordering options. Purchaser should specify type, class, style and size.
Plastic laminate panel. A sample of the decorative plastic laminate sheet is available from the General Services Administration, Federal Supply Service, National Furniture Center, Engineering Division, Washington, DC 20406.
Color panel. A sample of the baked enamel finish referenced in Fed. Std. No. 595 is available from the General Services Administration, Business Center, Federal Supply Service, Washington, DC 20407 or the Business Service Center in thenearest General Services Administration Regional Offices.
Federal standards. Federal Standard No. 595 is available from
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business