A-A-2086D
Pedestal. Pedestals shall be reinforced by vertical uprights. Suspension case rails shall be secured to the vertical uprights.
Typewriters compartment. The typewriter pedestal shall be on either the right or left hand and shall contain an elevation type platform. The typewriter platform mechanism shall be constructed of steel, having sufficient structural strength to easily withstand a load of 45 kg, minimum, without sagging, deformation, or structural damage. The mechanism shall be properly spring counterbalanced and shall have a positive metal locking device which operates automatically to hold the platform in place in the elevated position. The top of the typewriter platform, in the raised position, shall be 660 mm + 25 mm above the floor. The mechanism shall operate easily and smoothly with the typewriter in place and shall have ample clearance to accommodate typewriters having maximum outside dimensions of 460 mm wide, 435 mm deep, and 255 mm high. A label shall be permanently affixed to the back of the compartment door captioned “Warning” or “Caution” and setting forth complete operating instructions for the mechanism.
Drawers. The drawers shall have stops to prevent accidental removal but allow removal without the use of tools. The minimum inside clear dimensions shall be as specified in Table I. File and storage drawers shall be welded construction with double wall drawer fronts. The storage drawer body shall be constructed to accommodate partitions. Each storage drawer shall have a minimum of two (2) partitions. The storage drawers shall be suspended on telescoping ball bearing slides, rollers, or nylon glides. The slides, glides, or rollers shall promote smooth quiet operation and prevent metal to metal contact between suspension members. The file drawers shall be on full progressive suspensions or telescoping ball bearing slides. The file drawer shall have a spring-activated follower block which operates smoothly. Bumpers shall cushion drawer stops in both closed and extended positions. The center drawer shall contain a convenience tray and a locking mechanism controlling all
drawers. The lock control may be located in other convenient places.
TABLE I Drawer dimensions.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business