A-A-2082D
4.1 Responsibility for inspection. The contractor shall be responsible for the performance of all inspection and testing in fulfillment of all requirements specified herein. Unless otherwise specified in the contract or purchase order, the contractor may use his own or any other facilities approved by the Government as suitable for the performance of the inspection and tests required by this CID. The Government reserves the right to perform any of all of the inspections and/or tests set forth in this CID, as deemed necessary to provide assurance of supply conformance to prescribed requirements.
4.2 First article requirements. The first article requirements shall be as specified in the solicitation.
4.3 Quality conformance inspection. A sample of the finished product shall be selected in accordance with paragraph 5.6 of this CID for quality conformance verification. The sample shall be examined to verify that the requirements referenced in sections 1 and 2 have been met. Any non-conformance with the above requirements shall be considered a defect. All defects found shall be classified as major/minor in accordance with paragraphs 4.4 and 4.5 of this CID.
4.4 Major defects. The following conditions of non-conformancewith the stated requirements of the CID shall be considered as major defects which may potentially affect the safety, functionality, durability, usability, and life of the purcashed items.
No acceptable evidence Types I and II tables are in conformance with ANSI/BIFMA standard X5.5.
No evidence of Type II tables meeting the dropleaf and static load test.
Parts fractured, buckled, bent, punctured, or malformed. Rivets loose or not set properly. Sharp edges.
Preservation, packaging, and packing not in accordance with the requirements of the contract or purchase order.
Identification marking missing, wrong, or illegible.
4.5 Minor defects. Non-conformance listed below shall be considered as minor defects affecting the appearance of the finished item
Rough or slivered surface.
Burrs.
Rough tool markings.
Oversized holes.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business