A-A-2081D
3. For Style A, the plus tolerance on the width dimensions shall be 210 mm. For Style B, the plus tolerance on the width dimension shall be 110 mm.
General construction.
Top. Steel construction reinforced with formations extending the full length of the top for maximum rigidity. Top edges shall have a binding strip. The top shall be covered with a decorative, high pressure, laminated plastic. Alternatively, the top may be a particleboard with a high pressure, laminated plastic face and backing sheet to produce a balanced sandwich construction. A protective edging shall be used around the entire top and the color shall be gray, similar to the gray enamel finish (self-edging, not allowed). The white leather laminated plastic shall match GSA Standard Sample No. FSS-L-01001. Alternatively, the manufacturer may provide his equivalent commercial, white leather laminated plastic, subject to contracting officer approval. Overall top thickness shall be 25 mm, minimum.
Locks. The locks shall be of the disk or pin tumbler type, having not less than four disks or pin tumblers, and shall be operated by a grooved key. The locks shall have not less than 125 key changes. No one key shall open more than the lock on one unit up to minimum of 125 units consecutively produced. All locks on the credenza shall be keyed alike. Two keys shall be furnished with each credenza.
Drawers. The drawers shall have stops to prevent accidental removal, but aloe removal without the use of tools. The minimum inside clear dimensions shall be as specified in Table I. File, and storage drawers shall be welded construction with double wall drawer fronts. The storage drawer body shall be constructed to accommodate partitions. Each storage drawers shall have a minimum of one partition. The storage drawers shall be suspended on telescoping ball bearing slides, rollers, or nylon glides. The slides, glides, or rollers shall promote smooth quiet operation and prevent metal to metal contact between suspension members. The file drawers shall be on full progressive suspensions or telescoping ball bearing slides. The file drawer shall have a spring-activated follower block which operates smoothly. Bumpers shall cushion drawer stops in both
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business