A-A-1709H
the test if any two-compartment combination extends in excess of 150mm.
Shipping Shock Test. The test equipment shall comply with ASTM D-880. A complete fully assembled unit (cartoned) shall be submitted for test. Prior to cartoning, the unit shall be inspected for visual or functional damage and documented. The cartoned unit shall be placed onto the impact machine dolly flush against the back stop and parallel to the leading edge of the dolly. The catch mechanism located on the side of the dolly shall be tripped to allow the dolly to move up the incline at a 100 angle. Once the dolly hits the automatic trip mechanism, the dolly will freely roll down the incline at a distance of four feet and impact the back stop. This procedure shall be performed on the remaining 3 sides of the cabinet. The carton shall have failed the test if there is visual, structural or functional damage to the unit.
Shipping vibration test. The test equipment shall comply with ASTM D-999 1) A complete fully assembled unit shall be submitted for test. Prior to cartoning, the unit shall be inspected for visual and functional damage. The packaged product shall be placed on the vibration platform in its normal shipping position. Set the vibration frequency at a minimum speed sufficient to cause the packaged product to leave the platform momentarily so that a 2mm shim may be inserted at least 100m between the packaged product and the surface of the platform. Vibrate the packaged product for a total of one hour. A single 900 horizontal rotation should be accomplished after the first one half hour of the vibration, (if the size of the product of the product makes a 900 rotation impractical, a 1800 horizontal rotation is permissible) 2) Place the packaged product on the platform in its normal shipping position. Using the same vibration frequency, vibrate the packaged product for one half hour on each of its four sides, (three hours total). Inspect the carton for visual, structural or functional or functional damage to the unit.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business