A-A-1709H
hanging files and their contents. Standard height drawers shall be equipped with hanging folder frames to support both legal and letter size material filled laterally and front to back and adjustable dividers {3 per tier} to support legal and letter size material filled laterally, means to convert the drawer to legal or letter size depth. Standard height shelves shall be the roll out type with receding doors and equipped for filing material the same as the standard height drawers(front to back filing is not required). Standard height drawers and shelves shall have a minimum clear inside height of 257 mm.
Pulls. Pulls shall be a recessed type which includes a label holder. The finish shall be bright or satin polished anodized aluminum; satin or polished chrome plating on steel or die cast zinc, brass, bronze, satin finish stainless steel or painted to match the cabinet finish. The exposed surfaces of all face hardware used on a single unit shall be finished to match each other.
Interlock mechanism. The interlock mechanism shall be a positive, automatic mechanism (cords are not allowed). When one drawer or shelf is open, the remaining drawers and/or shelves shall be locked in the closed position.
Locking mechanism. The locking mechanism shall be the ganged type, which locks both sides of all drawers and doors. The locks shall be of the disk or pin tumbler type, having not less than four disks or pin tumblers, and shall be operated by a grooved key. The locks shall have not less than 125 key changes. No one key shall open more than one lock on one unit up to a minimum of 125 units consecutively produced. Two keys shall be supplied with each cabinet. The locking mechanism and lock shall operate easily and smoothly.
Finish. The finish shall be semi–gloss baked enamel or electrostatic powder coat paint. Unless otherwise specified, colors shall match Fed. Std. No. 595 black (27040) and parchment within the range delimited be (26586) and (26405). Alternatively, the manufacture may provide his commercial, black, baked enamel finish and commercial colors, subject to approval of the contracting officer.
Caution label and instruction label. A caution label shall be affixed to the face of the cabinet, at the top, advising users that excessive force to extend drawers and shelves could cause tipping of the cabinet. An instruction label shall be affixed in
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business