AA-F-358J parts. The parts list shall be printed on heavy paper or other suitable material and bonded by glue or adhesive to an inside surface of the cabinet in a location accessible to maintenance personnel.
3.11 Replacement of component parts. Component parts, such as drawers, suspensions, combination locks and external face hardware shall be capable of identical replacement in the field without the use of specialized tools or specially qualified personnel and without weakening the security protection of the cabinet. Spare parts lists for the manufacturer's current production shall be immediately available upon the written request from the user. Manufacturers shall maintain replacement parts for a minimum of five years after any design change.
3.12 Regulatory requirements. The offeror/contractor is encouraged to use recovered materials in accordance with Public Law 94-580, as amended, to the maximum extent practicable.
4. QUALITY ASSURANCE PROVISIONS
4.1 Inspection responsibility. Except that testing for qualification shall be performed by an agency designated by the General Services Administration, the supplier is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified, the supplier may utilize his own or any other inspection facility or service acceptable to the Government. Inspection records of the examination and tests with itemized results shall be kept complete at the manufacturer's facility, available to the Government throughout the duration of the contract, or a minimum of two years, whichever is longer. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure that supplies and services conform to the prescribed requirements.
4.1.1 Component and material inspection. In accordance with 4.1, the supplier is responsible for insuring that components and materials used are manufactured, tested and inspected in accordance with the requirements of referenced specifications and standards to the extent specified or, if none, in accordance with this specification.
4.2 Qualification testing and inspection. Qualification testing and inspection shall consist of the following tests and inspections. Failure to meet any one of these requirements shall provide reason to consider the product as having failed to meet the requirement for qualification.
(a) Drawer pull test - 4.6.1 (b) Out stop test - 4.6.2
(c) Rack test - 4.6.3
(d) Service test - 4.6.4
(e) Moving test - 4.6.5
(f) Follower block test - 4.6.6
(g) Lock drawer test - 4.6.7
(h) Locking mechanism service test - 4.6.8
(i) Carrying handle test - 4.6.9
(j) Drop test - 4.6.10
(k) Surreptitious, covert and forced entry test - 4.6.11
(l) Radiological test - 4.6.12
(m) Finish Test - 4.6.13
(n) Inspections - 4.7
In addition, Class 6-S containers shall be tested to the following: (o) 6 inch drop test - 4.6.14
(p) High impact shipboard shock test - 4.6.15
(q) Vibration test - 4.6.16
15
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business