AA-F-358J
3.3.7 Drawer dimensions. The minimum drawer dimensions shall be as shown in Table II. Inside drawer dimensions are exclusive of the hanging folder support.
TABLE II. Drawer dimension. (All dimensions are in inches.) Minimum, inside drawer, clear (excluding follower block)
Cabinet Size All legal size |
Height 10-1/4 |
Width 15-1/4 |
Depth 24 |
All letter size |
10-1/4 |
12-1/4 |
24 |
Class 5 Size IV |
10-1/4 |
15-1/4 |
14-1/2 |
Class 6 Size VI |
10-1/4 |
12-1/4 |
16-1/2 |
Class 6 Size VII & VII |
I 10-1/8 |
12-1/4 |
13 |
3.3.8 Class 6, Size VIII carrying handles. The cabinet shall be provided with 2 lift type carrying handles. The handles shall be of a hinged down design and shall be attached in such a manner and position to provide balance and facilitate the movement of the cabinet. The handles are not intended to provide security against unauthorized removal of the cabinet but are furnished to assist in the authorized movement of the cabinet from one location to another. The handles shall have all surfaces ground smooth to eliminate roughness and sharp edges. The assembly shall be provided with stops to prevent the handles from being raised beyond the 90 degrees from the hinged down position. The handles and their attachment shall be capable of withstanding the test specified in 4.6.9.
3.3.8.1 Class 6, Size VIII carrying handle assembly dimensions. The carrying handles shall be of not less than 1/2 inch diameter steel. The handle handhold shall be not less than 3-1/2 by 1-1/4 inches and shall be designed to easily accommodate the user's hand. The handles shall be securely attached to
a metal plate support surface of not less than 1/4 inch thickness. The support surface shall be attached to the cabinet case by a continuous arc welding process so as to withstand rough handling. The handle assembly, when in the lift position, shall provide a clearance of not less than 2 inches from all projections on the cabinet.
3.3.8.2 Class 6, Size VIII dial knob protector. The dial of the cabinet shall be protected by a shield of not less than 16 gage (0.0598 inch) steel. The shield shall project beyond the outmost surface of the dial assembly and shall be securely welded to the cabinet to withstand heavy abuse. The attachment of the shield shall not interfere with the ease of dialing the lock combination, nor shall its attachment weaken the tamper resistance qualities
of the cabinet.
3.3.9 Caster base platform. When specified (see 6.2), a caster base shall be furnished. The casters shall be attached to the four corners of a dolly platform without mechanical attachment to the cabinet. The dolly platform shall be of the same dimension as the cabinet base. Caster and dolly
shall be manufactured of malleable steel and shall have sufficient strength to transport safely, loads equal to 2-1/2 times the weight of the cabinet.
Minimum width of casters for each of the four corners of the dolly shall be
1-1/2 inches. If dual casters are used, each caster wheel shall be a minimum
of 3/4 inch wide.
3.4 Locking mechanism and lock.
3.4.1 Lock mechanism. All drawers of the cabinet shall be locked with a dead bolt locking mechanism which is controlled by a changeable, combination lock specified in 3.4.2. Under the conditions specified in 4.6.7, it shall not be possible to secure the control (lock) drawer when any other drawer is open beyond the point of engagement of the locking mechanism. The requirements of
10
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business