damage to the unit.
Shipping vibration test. The test equipment shall comply with ASTM D-999. A complete fully assembled unit shall be submitted for test. Prior to cartooning, the unit shall be inspected for visual and functional damage.
The packaged product shall be placed on the vibration platform in its normal shipping position. Set the vibration frequency at a minimum speed sufficient to cause the packaged product to leave the platform momentarily so that a 2 mm shim may be inserted at least 100 mm between the packaged product and the surface of the platform. Vibrate the packaged product for a total of one hour. A single 90o horizontal rotation should be accomplished after the first one-half hour of vibration. If the size of the product makes a 90o rotation impractical, a 180o horizontal rotation is permissible.
Place the packaged product on the platform in its normal shipping position. Using the same vibration frequency, vibrate the packaged product for one half hour on all of its sides, excluding the top, 2-1/2 hours total. Inspect the carton for visual, structural or functional damage. Remove the product from the carton and inspect it for visual, structural or functional damage to the unit.
Preservation, packaging, packing, labeling, and marking. The preservation, packaging, packing, labeling and marking shall be as specified in the contract or order.
An impact detection device with companion or warning label shall be affixed to all cartons in a location that is clearly visible known sources for these devices are Media Recovery, 1195 Empire Central, Dallas TX 754247, 1-800-527-9497, Impact O-Graph, 20710 Lassen Street, Onatsworth, CA 91311-4598, (818)341-3000 and Uline Inc, 950 Albert Drive, Lake Pluff, IL, 60044, (708)295-5510.
Regulatory requirements. The offeror/contractor is encouraged to use recovered materials in accordance with Public Law 94-580, as amended, to the maximum extent practicable.
Standards. The issues of ANSI/BIFMA X5.3, ANSI/ASQC Z1.4 and Fed.Std.595 in effect on the date of the Solicitation shall be used to determine compliance with the stated requirements.
Notes. Purchasers should specify the type, size, class, and color of the file cabinet required.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business