die-cast zinc, brass or bronze, polished stainless steel, polished anodized aluminum or painted to compliment the cabinet color.
Caution label. A caution label shall be affixed to the top left corner face of the top drawer as shown.
Caution:
1. Load the bottom drawers first.
2. Open only one drawer at a time.
The label shall not be removable by hand without defacement after being affixed for 4 hours.
Identification label. The identification label shall be white with the contractor’s name or trademark, contract or order number, item stock number, and month and year of manufacture legibly marked in permanent dark ink. The label shall be affixed to the inside of the top drawer and shall not be removable by hand without defacement after being affixed for 4 hours.
Workmanship. The workmanship shall be of the quality to produce finished cabinets acceptable in appearance, function and serviceability.
Quality assurance provisions. Unless otherwise specified on the contract or purchase order, the contractor is responsible for the performance of all inspection requirements specified herein. Sampling for inspection shall be performed in accordance with ANSI/ASQC Z1.4-1993, unless an equal or better plan is approved by the contracting officer or his/her representative. A lot shall consist of units of one type, class, size, and color. The sample shall be one each Inspection level’s and AQL’s shall be as follows.
For fit, finish and all other workmanship- Level II, AQL 2.5 defects per hundred units.
For packaging, packing, and marking- Level S-2, AQL 4.0 percent defective.
Any failure to meet the dimensions, color, identification label or performance requirements shall cause rejection of the lot.
Performance tests. Each unit shall meet the following requirements.
Failure of any cabinet to meet these requirements shall be cause for rejection.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business