A-A-2087D
NOTE:
1. Height shall be measured with glides fully retracted.
2. Unless otherwise specified, the tolerance on dimensions shall be + 25 mm.
3. The plus tolerance on the width dimension shall be 105 mm.
General construction.
Top. Steel construction reinforced with channels or other formations extending the full length of the top for maximum rigidity. Top edges shall have a binding strip. The top shall be covered with decorative high pressure laminated plastic. Alternatively, the top may be particleboard with high pressure laminated plastic face and a backing sheet to produce a balanced sandwich construction. A protective edging shall be around the entire top and the color shall be gray similar to the gray enamel finish (self-edging, not allowed). The white leather laminated plastic top shall match GSA Standard Sample No. FSS-L-01001.
Alternatively, the manufacturer may provide his equivalent commercial white leather laminated plastic subject to contracting officer approval.
Pedestals. Pedestals shall be reinforced by vertical uprights. Suspension case rails shall be secured to the vertical uprights.
Drawers. The drawers shall have stops to prevent accidental removal but allow removal without the use of tools. The minimum inside clear dimensions shall be as specified in Table I. Filer and storage drawers shall be welded construction with double wall drawer fronts. The storage drawer body shall be constructed to accommodate partitions. Each storage drawer shall have a minimum of two (2) partitions. The storage drawers shall be suspended on telescoping ball bearing slides, rollers, or nylon glides. The slides, glides, or rollers shall promote smooth quiet operation and prevent metal to metal contact between suspension members. The file drawers shall be on full progressive suspensions or telescoping ball bearing slides. The file drawer shall have a spring-activated follower block which operates smoothly. Bumpers shall cushion drawer stops in both closed and extended positions. The center drawer shall contain a convenience tray and a locking mechanism controlling all drawers.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business