A-A-701A
(2) Chromium plating test. (Only applicable to chairs having chromium plating) Plated samples shall be tested for corrosion in accordance with the 5 percent neutral salt spray at 95oF (35.0oC) in accordance with ASTM B 117. The test period shall be not less than 48 hours. After the specified exposure is completed, the specimen shall be visually examined to assure that the plating shows no evidence of peel, chip, uneven color, powder film, pits or stain. Widely scattered spots of corrosion are permitted, however, none of these spots shall exceed 1/16 in (1.6 mm) along the greatest dimension.
Regulatory requirement. The offeror/contractor is encouraged to use recovered materials in accordane with public Law 94-580 to the maximum extent practical.
Presercation, packaging, packing, labeling, and marking. The preservation, packaging, packing, and marking shall be as specified in the solicitation.
Notes.:
Purchasers should specify arm or armless chairs and upholstery color.
ANSI Standards are available from: American National Standards Institute. Inc., 1430 Broadway, New York, NY 10018.
ASTM Standards are available from: American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103.
Government standard color samples are available from the Engineering Division, Furniture Commodity Center Office of Federal Supply and Services, General Services Administration, Washington, DC 20406.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business