A-A-2239 Stand, Office Machine (Edp, Printer)

Pages 1 - 2

A-A-2239

October 8, 1985

COMMERCIAL ITEM DESCRIPTION

Stand, Office Machine (EDP, Printer)

The General Services Administration has authorized the use of this commercial item description.

Salient Characteristics.

These characteristics concisely describe the essential physical and functional/performance features of the items covered herein.

Design.  The printer stand shall be designed for heavy duty use and to be compatible with other components of the modular line.

Ordering options. Colors and grain of plastic laminate; color of finish.

Tops. . Tops shall be covered with HP plastic laminate with backing sheet on bottom (steel cores excepted), walnut grain per GSA Standard Sample No. FSS-L-0.01002, light oak grain per GSA Standard NO. FSS-L-01015 or matte parchment laminate within the limits of the parchment enamel. Alternatively, the manufacturer may provide his equivalent walnut or light oak grain HP plastic laminate subject to the contracting officer approval. Molding, if used, shall have radius corners and shall match the baked enamel finish within the limits of the material used with corners rounded. Overall thickness shall be 1” minimum. Self edge not allowed on front or rear edges of top. Paper feed slot shall be 16”W by 1-1/2”D minimum and shall be smoothly finished and protected to prevent moisture penetration. The top shall be 36”W by 30”D minimum. The height of the top surface above the floor shall be 26” minimum, 27” maximum (glides fully retracted). Disassembly of the top from the base by removal of screws directly screwed into composite tops is unacceptable.

Base. The base shall have 4 corrosion resistant adjustable glides. Modesty panel (10 1/2"H minimum). Conventional table legs not acceptable. Wire management which controls wires between the top surface and the floor shall be provided. Input and output racks or shelves, minimum 18”W X 12”D. The metal finish shall be semi-gloss baked enamel with colors Fed. Std. No. 595 black (27040) or parchment within the range delimited by (26586) and (26405). Alternatively, the manufacturer may provide his commercial black baked enamel finish subject to the contracting officer approval. The HP laminate colors shall match the parchment and black baked enamel.